Main Menu
Home
Photo Gallery
Trucks
Technical Info
4x4wire Articles
Contact Me
- - - - - - - - - - - -
Popular Articles
Toyota 3.4L Engine Swap - Replacing the 3.0L

article thumbnail After buying a '95 4runner for $1500 with a bad rod knock, I soon realized that I was going to have a hard time finding a good engine for it. After researching for a few days, I decided to install...
+ Full Story

Smurf Blue 74 FJ-40 Land Cruiser

article thumbnail This is my current project - a 1974 Toyota Land Cruiser. I have been working on it for 5 years and am in the process of adding the finishing touches.
+ Full Story
Home arrow Technical Info arrow 3.4 Swap
Toyota 3.4L Engine Swap - Replacing the 3.0L Print
Monday, 05 June 2006
Article Index
Toyota 3.4L Engine Swap - Replacing the 3.0L
Fitting the Engine
Parts List
Oil Pan and Dipstick Info
Motor Mounts
Oil Pressure Sender
Wiring
Clutch
Exhaust
Fuel System, other lines
Power Steering
Radiator, Fan and Hoses
Throttle Cable
Air Conditioning
Cruise
Page 11 of 15
 

Power Steering

Not much has to be done to get the power steering to work. I had to grind the tab off of the banjo fitting to get the hose to bolt to the power steering pump. You will need to use the 3.4 steering pump.

I also needed to use the 3.0 banjo fitting bolt as the bolt on the 3.4 pump was too long.



Last Updated ( Thursday, 11 September 2008 )
 
[ Back ]